How a Factory Quote Is Built: What Goes Into a Garment's Factory Price
When overseas buyers receive a factory quote, the most common question is: "Where does this number come from? Can it go lower?"
A quote isn't a made-up figure — it's built up from separate cost blocks. This article breaks it down, so you know where there's room to negotiate and where there isn't.
1. The Six Blocks of Factory Price
1. Fabric cost (the biggest block, usually 40%–60%)
How much fabric a garment uses depends on the pattern, size mix and marker efficiency. A 280g vs. 320g fleece changes the fabric cost, and how tightly the marker is laid out affects it too.
2. Trims and accessories
Zippers, buttons, drawcords, ribbing, webbing, hangtags, care labels, neck labels, packaging materials. These "small parts" often add up to 10%–15% of the price. An imported zipper versus a standard one makes a noticeable difference.
3. Sewing labor
Cutting, sewing, overlocking and pressing. The more complex the style — contrast stitching, color blocking, multiple pockets, special fits — the higher the labor cost compared to a basic piece.
4. Process cost
Printing, embroidery, washing, rhinestones, flocking, laser work and other specialized steps. Each process is a separate charge. Large-area prints, dense embroidery and heavy wash treatments all raise the unit price.
5. Waste and overhead
Fabric defect allowance, cutting leftovers, defect loss, inspection, packaging and shipping extras. This is a reasonable reserve — not "markup."
6. Factory profit and management
Factory space, equipment, management, merchandising and QC allocation, plus a reasonable margin.
2. Why the Same Style Can Quote Differently
1. Different fabric.Weight, composition, origin, pre-shrunk or not — all move the price. Comparing unit prices without comparing fabric is the easiest way to get misled.
2. Different processes.Plastisol print vs. DTG, flat embroidery vs. chenille — they aren't in the same cost range.
3. Different quantity.The smaller the order, the more labor and pattern-setup cost spreads across each piece. A 50-piece order and a 1,000-piece order shouldn't carry the same unit price.
4. Different trim grade.The grade of zippers, ribbing and hangtags directly affects the total.
5. Region and capacity.Labor, equipment and schedule differ between factories, so cost structures differ too.
3. How to Negotiate Effectively
1. Align the spec first, then the price. Confirm fabric weight, composition, trim grade and process method before comparing quotes. **Different specs make unit prices incomparable.
2. Find room through quantity. The most direct lever on unit price is volume — as quantity goes up, per-piece cost naturally comes down. Planning first orders and reorders together works better than squeezing the quote.
3. Optimize processes together. Dense embroidery or heavy wash can be discussed with the factory as alternatives (for instance, switching to a print) to balance effect and cost.
4. Don't push unit price alone. Squeezing a factory to zero margin usually comes back as weaker QC and slower lead times. **A fair price plus stable quality is what a long partnership is built on.
4. One Line From the Factory Side
Every block on a quote corresponds to real input. We can break the cost out clearly and cut the fat — but fabric, labor and process are the three blocks that can't be squeezed out.

